The marine current turbine (MCT) is an exciting proposition for the extraction of renewable tidal and marine current power. However, the numerical prediction of the performance of the MCT is difficult due to its complex geometry, the surrounding turbulent flow and the free surfa…
"9" Result
Sort By:
A large eddy simulation (LES) model has been developed and validated for turbulent non-premixed and partially premixed combustion systems. LES based combustion modelling strategy has the ability to capture the detailed structure of turbulent flames and account for the effects of…
Large Eddy Simulation is a method of obtaining high accuracy computational results for modelling fluid flow. Unfortunately it is computationally expensive limiting it to users of large parallel machines. However, it may be that the use of LES leads to an over-resolution of the p…
The flow characteristics in compound channels with and without vegetation on the floodplain were investigated experimentally and numerically in this thesis. Detailed measurements of velocity and boundary shear stress, using a Pitot tube and an acoustic Doppler velocimeter togeth…
The major source of aircraft noise at take-off is jet noise. If jet noise is not adequately addressed environmental impact concerns will constrain the planned growth of the air transport system. A considerable amount of research worldwide has therefore been aimed at identifying …
The periods of time-varying turbulence in the atmospheric boundary layer, i.e.\ the morning and evening transitions, are often overlooked or highly idealised by dispersion models. These transitions make up a significant portion of the diurnal cycle and are known to affect the sp…
This study investigates the complex flow structure generated by riparian emergent vegetation along the edge of floodplain. Detailed velocity and boundary shear stress measurements were carried out for various arrangements of emergent rigid cylindric rods of 3 mm, 6 mm and 9 mm d…
In many areas of aerodynamics the technique of Large Eddy Simulation (LES) has proved a practical way of modelling the unsteady phenomena in numerical simulations. Few applications are as dependent on such an approach as the prediction of flow within a gas turbine combustor. Lik…